Original Xentry Diagnosis VCI OEM C6 for W206 W223 Used
The VCI used so successfully before in XENTRY Diagnosis Kit 3 is also part of the scope of supply for XENTRY Diagnosis Kit 4. It’s an OEM dealer of the current generation, and is removed from production: it is replaced by Xentry Diagnosis VCI from Bosch. The NEW Xentry Diagnosis VCI is fundamentally different for the better from its predecessor: easy and convenient, without built-in PCs and hard drives inside, no fans, battery, and display.
Note: the Original Xentry Diagnosis VCI is 2nd hand-used condition but original OEM which will work with the OEM Xentry Diagnosis 09/2024 on W223 W206 W213FL and W167 2022 models and work with OEM SCN online programming and coding for the new models.
VCI C6 Package Include
- Original OEM Xentry VCI C6 Original Used 1pc
- Bosch OBD2 connection cable brand new (part no. 1699200366) 1pc
- Bosch USB connection cable brand new 1pc
We will also possibly support global customers with the below OEM Xentry service:
- 09.2024 Xentry Diagnostic System Install with SSD system ready to work or remote installation of Xentry 09/2024
- 09.2024 Xentry Diagnosis system patches for W223 W206 W167 W213FL if you already have the 12.2022 ready to work
- OEM SCN coding online remotely for OEM 2022 models or DTS9 coding programming remotely
(MUST have this original Xentry VCI which supports DOIP protocols for 2021-2023 models if you have )
Product advantages
- The practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
- No more diagnosis updates are required – only firmware updates on rare occasions
- Can be used for all model series
- Does not require an adapter for an external power supply
XENTRY Diagnosis VCI technical data
| Feature | |
| Network connection | |
| Cabled | USB 2.0 |
| WiFi stick | 802.11b/g/n |
| Processor system | |
| Microprocessor | Intel MX6 Solo |
| RAM | RAM: 512 MB DDR3 RAM |
| ROM | 512 MB flash |
| User interface | |
| LEDs | 5 status LEDs |
| Power supply* | |
| From the vehicle battery via the diagnosis connection cable or via a connected USB cable. | 8 V to 28 V |
| Certifications | |
| VCI | FCC, CE, RoHS |
*Important: The contact socket in the vehicle must be protected with a fuse with a maximum rating of 6 A/32 V.
For more details about the OEM Xentry Diagnosis dealer package
XENTRY Diagnosis Kit 4 consists, as usual, of two components:
- XENTRY Diagnosis Pad 2
- XENTRY Diagnosis VCI
The device concept is comparable with that of its predecessor XENTRY Diagnosis Kit 3. XENTRY Diagnosis Kit 4 now offers many more advantages in comparison to XENTRY Diagnosis Kit 3. Easier to use The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits. XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C port Located on the front side are two buttons that you can configure individually using ConfigAssist To provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued. Much faster XENTRY Diagnosis Pad 2 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz) The main memory has 16 GB DDR4 1 TB SSD hard drive (with 3000 MB/s read and write speed) More convenient The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card. XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan. XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.
| Weight | 4 kg |
|---|
Be the first to review “Used Original Xentry Diagnosis VCI OEM C6 for W206 W223”
Related products
$149.00
$2,499.00
$299.00 – $419.00
$2,900.00
$569.00
$1,599.00
$49.00
Reviews
There are no reviews yet.